G26 to do list.
1. finish 1st coat and start 2nd coat interior paint
2. remove and replace rotten stringer. Paint bilge!
2. sand areas of repair, and open other areas to be repaired
3. sand and clean up bottom including keel.
4. repair areas on deck.
5. repair seat in dinette
6. repair partition under cockpit.
7. strip cockpit of bad paint
8. clean and re-tape cockpit hatch covers.
9. paint other areas in cabin.
10. remove and reinstall good hatch teak
11. repair and reinstall companionway hatch.
12. clean up all fitting hardware(bedding compound)
13. install ball cup for tiller pilot.
14. install cable covers for battery and control cables.
15. replace leg on outboard and add lower leg oil.
Will talk about sailing, my repairs, improvements.. et al.
